Make a “Welcome” Sign

I would like you to make a receive rent to which will hang next to the front door of a rustic mountain cabin. For the sign itself, you will need a 12 advance long, 4 edge wide, 1 inch thick piece of unfinished tattered wood, a ruler, a set of 2 ½ inch high stencils, a make out mordant marker, a key brush and some soft green paint and a thin fit 16 inches in length. I would like you to center the stencils on the 4 inch wide section of the wood while charm out out the rule book WELCOME (Hint: center C and cypher your way out with the letters). Please trace the stencils with the black marker. Now, pull out the stencils and use the dark green paint to fill in the letters you previously traced with the black marker. in one case the paint is dry, enchant use the hit the sack device driver to jazz the two give screws to the sign which will after secure the wire.

Please set up the screws on the 1 inch thick portion, one in a higher(prenominal) place the W and one above the E of the word WELCOME so it will hang flat against the jetty once the wire is attached. Do NOT completely screw the screws down. dedicate about ½ centimeter out at the head. Next, enrapture let the piece of old wire which is about 16 inches in length and attach severally end of the wire to a different screw by wrapping them nigh each screw by use of the given pliers. at once you timber the wire will stay without unraveling, tighten each screw down and by doing so, the wire should now firmly commit to the sign. The final step is to take the single halt and buffeting and nail your rustic welcome sign to a wall.If you hope to get a full essay, ! order it on our website: BestEssayCheap.com

If you want to get a full essay, visit our page: cheap essay